Professional installation · Toronto & the GTA

Professional Window and Door Installation in Toronto & the GTA

Imperial Windows & Doors provides residential window and door installation in Toronto and the GTA. We replace windows, entry doors and sliding patio doors, with measurements, installation methods and finishing planned for your home.

We assess the existing frame and opening before recommending the work. Your written estimate should identify the selected products, removal, insulation, sealing and finishing requirements. Read below to compare retrofit and full-frame window installation and learn how to prepare for installation day.

Get a Free Estimate

Black replacement windows and a bay window installed on a Toronto brick home by Imperial

Window and Door Installation Built Around Your Home

Toronto and GTA homes have many different construction styles. Older brick houses may have wood frames, uneven openings, deteriorated insulation or previous renovations hidden behind the trim. Newer homes can have different wall depths, exterior cladding systems and builder-installed windows. Bay windows, basement windows, doors with sidelights and oversized patio doors also require different installation and finishing techniques.

For that reason, Imperial does not treat every opening the same. We examine the condition of the existing unit, the rough opening, the exterior brick or cladding, the interior trim, accessibility and any visible signs of water damage before recommending an installation method.

Your written estimate should clearly identify the products being supplied, the proposed installation method and the finishing work included. Items such as exterior aluminum capping, interior trim, disposal of old units or repairs to damaged materials should never be left unclear. Our window replacement cost guide explains how installation methods and existing conditions can affect the final project price.

Professional Window Installation in Toronto

Imperial installs custom-sized vinyl windows for bedrooms, kitchens, living rooms, basements and other areas of the home. Available styles include casement, awning, slider, hung, fixed, bay, bow and specialty-shaped windows.

A professional window installation involves more than placing a new unit into an opening. The window must be supported correctly, installed level, plumb and square, and fastened without distorting the frame. The perimeter must then be insulated and sealed using suitable materials for window and door openings. Exterior capping, caulking and interior finishing are completed according to the installation method and the written project scope.

Before ordering, we confirm the measurements, window style, operating direction, glass options, frame colour and finishing requirements. These details help prevent delays and ensure that the manufactured window matches the actual opening.

Retrofit Window Installation

A retrofit installation leaves the existing main window frame in place and installs the replacement unit within that frame. This method can be appropriate when the original frame is structurally sound, dry and free from rot or serious deterioration.

Retrofit installation normally involves less removal and can reduce disruption inside and outside the home. However, it also leaves the original frame in place and may slightly reduce the visible glass area. It should not be used to hide a damaged frame, water problem or poor previous installation.

Full-Frame or Brick-to-Brick Window Installation

A full-frame installation—often called brick-to-brick replacement—removes the complete old window and frame down to the original opening. This allows the installer to inspect the surrounding materials, identify hidden damage, improve the perimeter insulation and install a completely new window system.

Full-frame replacement usually involves more labour and finishing than retrofit installation, but it may be the better long-term choice when existing frames are damaged, poorly insulated or no longer suitable. It can also provide a cleaner finished appearance and preserve more visible glass area.

Not every window needs a full-frame replacement, but not every old frame should be covered up. The correct choice depends on the condition of the individual opening. You can learn more about the work completed on installation day in our Toronto window replacement process guide.

Replacement vinyl window being checked for level during installation in a Toronto brick home

Exterior Door Installation in Toronto and the GTA

An exterior door must operate smoothly while also providing security, weather resistance and a consistent seal around the frame. If the frame is installed out of square, the door may rub, swing unexpectedly, leave uneven gaps or require force to latch and lock.

Imperial installs steel entry doors and fiberglass entry doors, including single doors, double doors, sidelights, transoms and decorative-glass configurations. We also install sliding patio doors and storm doors for Toronto and GTA homes.

Entry Door Frame, Threshold and Hardware Alignment

A pre-hung entry door system includes the door slab, frame, hinges and threshold. During installation, the frame must be positioned plumb and square, with appropriate shimming and fastening near critical hinge and strike locations. The threshold needs stable support, and the perimeter must be insulated and sealed before the interior and exterior finishing is completed.

We then check the spacing around the door, hinge operation, weatherstripping contact, sweep or threshold seal, latch alignment and deadbolt operation. A lock should engage smoothly without needing to lift, push or force the door.

Doors with sidelights or transoms require additional attention because the complete assembly is larger and must remain properly aligned across the entire opening. Our entry door replacement guide explains the available materials, glass, security and design options in more detail.

Patio and Storm Door Installation

Sliding patio doors need a stable, level sill so that the panels can roll smoothly and meet the weatherstripping evenly. The frame must remain square, and the perimeter must be insulated and sealed without distorting the tracks.

Storm doors also require accurate measurement and enough clearance for the entry-door handle and hardware. Before ordering, we review the opening size, swing direction, handle location and relationship between the storm door and the main entry door.

Fiberglass entry door frame being checked for level during installation in a Toronto brick home

From consultation to final inspection

Our Window and Door Installation Process

1. In-Home Consultation and Project Review

We begin by discussing what you want to replace and what problems you are experiencing. These may include drafts, water leaks, damaged frames, difficult operation, outside noise, security concerns or an outdated appearance.

We inspect the openings, discuss suitable products and explain which installation method may be appropriate. You will have an opportunity to review window styles, glass packages, door materials, colours, hardware and finishing options before making a decision.

2. Final Measurements and Order Confirmation

Accurate measurements are essential because replacement windows and exterior doors are manufactured for specific openings. Before the order is finalized, we confirm the dimensions, wall depth, operating direction, door handing, swing clearance, sill conditions and finishing requirements.

We also review details such as exterior colour, interior finish, glass design, screens, grilles, hardware and any sidelights or transoms included in the project.

3. Scheduling and Pre-Installation Preparation

Once the products are ready, we arrange an installation date and explain how to prepare the work area. Before beginning, the installation team confirms the project scope and identifies the windows or doors being replaced.

Homeowners should remove fragile objects, window coverings and small furniture from the immediate work area. Pets and young children should remain away from the work zone, and any alarm contacts attached to the old windows or doors should be discussed in advance.

4. Protecting the Work Area and Removing the Old Unit

We protect the working area and the pathway used to carry tools, materials and removed units. The old window or door is taken out carefully to limit unnecessary damage to the surrounding walls, floors, brick and trim.

Where practical, openings are handled individually so that the home is not exposed to outside conditions longer than necessary. The exact removal procedure depends on whether the project is retrofit, full-frame, brick-to-brick or a complete pre-hung door replacement.

5. Inspecting and Preparing the Opening

Once the old unit is removed, the exposed opening can be examined more closely. Loose material and debris are cleared away, and the sill and surrounding structure are checked before the replacement unit is installed.

Occasionally, concealed rot, water damage or previous construction problems become visible only after removal. If unexpected repairs are required, they should be explained and approved before work continues.

6. Installing, Insulating, Sealing and Finishing

The new window or door is positioned, levelled, shimmed and fastened according to the opening and product requirements. We check the frame throughout the installation to prevent twisting or distortion.

The perimeter is insulated using materials suitable for window and door openings. Exterior sealing, aluminum capping, interior trim and other finishing work are then completed as specified in the written estimate.

7. Final Inspection and Cleanup

Before completing the project, we operate the windows, doors, locks and hardware. We check alignment, spacing, weatherstripping contact and the overall finished appearance.

The work area is cleaned, and the homeowner is shown how to operate and care for the new products. Applicable product and installation information should be retained with your project records.

Protected floor and organized work area during a Toronto window installation

Why Correct Installation Matters

The installation affects how the complete window or door system performs. Correct measurement, support, insulation, sealing and finishing can help prevent:

Drafts caused by gaps around the frame
Water entering around exterior joints
Window frames becoming distorted or difficult to operate
Entry doors rubbing, sagging or failing to latch properly
Uneven gaps around a door slab
Premature wear on locks, hinges and operating hardware
Visible gaps or untidy exterior finishing
Unnecessary paths for outside noise

The window style, glass package and door construction also affect comfort, sound control and energy performance. Installation cannot turn a basic product into a premium one, but poor installation can prevent a high-quality product from delivering its intended performance. Homeowners concerned about traffic or aircraft noise can also read our guide to soundproof windows in Toronto.

How to Prepare for Installation Day

A little preparation helps the work proceed safely and efficiently:

Clear furniture and personal items from around each opening.
Remove curtains, blinds and delicate decorations.
Protect or remove fragile wall hangings near the work area.
Tell us about window or door alarm contacts before installation.
Keep children and pets away from tools and open work areas.
Make space in the driveway when access is required for products and equipment.
Confirm any special access, parking or condominium requirements in advance.

We will let you know if your particular installation requires additional preparation.

Why Toronto Homeowners Choose Imperial

Imperial Windows & Doors has served homeowners across Toronto and the GTA since 2010. Our installation recommendations are based on the condition of the home, the selected products and the homeowner’s priorities—not on automatically recommending the most expensive method.

Homeowners choose Imperial because we provide:

Accurate measurements for custom-manufactured windows and doors
Clear explanations of retrofit and full-frame installation options
Window, entry-door, patio-door and storm-door solutions from one company
Careful protection of the home and work area
Detailed project scopes and straightforward recommendations
Final inspection of operation, alignment and finishing
Continued access to applicable window and door warranty information

Do not judge an installer only by a sales presentation. Look at completed work and feedback from real homeowners. You can view our window and door project gallery and read Imperial customer reviews before requesting an estimate.

Black replacement windows installed on a two-storey beige-brick Toronto home

White replacement windows installed on a red-brick Toronto home

Woodgrain fiberglass entry door with sidelight and arched transom installed in Toronto

Black replacement windows installed on a red-brick Toronto home

Woodgrain fiberglass double entry doors with decorative glass installed in Toronto

Modern black Fiberglass entry door with sidelights installed in Toronto

White replacement windows installed on a Toronto brick townhouse

Black steel entry door with decorative wrought-iron glass installed in Toronto

Window and Door Installation Areas

Imperial provides residential window and exterior-door installation throughout Toronto and the Greater Toronto Area. Our service area includes North York, Etobicoke, Scarborough, Bolton and surrounding communities, as well as:

Plan Your Window or Door Installation

If you are considering replacement windows, a new entry door, a sliding patio door or a storm door, Imperial Windows & Doors can assess the project and explain the available options.

Tell us what you want to replace, where the home is located and which problems you want to solve. We will help you compare suitable products and recommend an installation approach based on the condition of your home.

Get a Free Estimate
Call 416-565-5363

Frequently Asked Questions About Window and Door Installation

How long does window installation take?

On-site timing depends on the number and size of the windows, access, installation method and finishing work. Full-frame removal or repairs to the opening can add time. Manufacturing and delivery are separate from installation; ask for both the expected delivery window and the on-site schedule when reviewing your estimate.

How long does entry door installation take?

Timing depends on the door configuration, condition of the opening and finishing requirements. Sidelights, transoms, frame repairs or changes to the opening can add to the work. Confirm the expected installation schedule for your selected door system during your estimate.

Can windows and doors be installed during winter?

Yes, replacement windows and exterior doors can be installed during much of the Toronto winter when conditions are safe. Installers can work on one opening at a time and limit how long the home is exposed. Severe wind, precipitation or extreme temperatures may require the installation to be rescheduled.

What is the difference between retrofit and full-frame window installation?

Retrofit installation places a replacement window within a suitable existing frame. Full-frame or brick-to-brick installation removes the complete old window and frame, allowing the entire opening to be inspected, insulated and refinished. The right method depends on the condition of the existing frame and the goals of the project.

What is included in the installation price?

The included work depends on the selected product and installation method. Your written estimate should identify removal, installation, insulation, exterior sealing, aluminum capping, interior trim, disposal and any other finishing work. Repairs for concealed damage may require a separate discussion if the problem cannot be seen before removal.

What happens if rot or water damage is discovered?

The damaged area must be assessed before the new unit is covered or finished. We will explain what was found and discuss any necessary repairs. Additional work that falls outside the original scope should be approved before proceeding.

Do doors with sidelights and transoms require special installation?

Yes. These systems are wider and sometimes taller than a standard single-door unit. The complete assembly must be properly supported, levelled, fastened, insulated and sealed while maintaining consistent spacing and smooth operation.

Are installed windows and doors covered by a warranty?

Warranty coverage depends on the manufacturer, product and project scope. Review our warranty information and retain all applicable documents provided with your installation.

How much does professional installation cost?

Cost depends on the size and type of window or door, product options, installation method, accessibility, finishing requirements and the condition of the existing opening. The most accurate price comes from an on-site assessment and detailed written estimate.